GUIDED WAVE’S Multi-Purpose Flow Cell (MPFC) is used whenever direct insertion probes are not appropriate and the process material does not require the added assurance of the High Safety Flow Cell. One of the primary advantages of near-infrared process spectroscopy is the utilization of intrinsically safe fiber optic cables to remotely locate the probe. While direct insertion probes eliminate sample loops and sample systems and their associated problems, sometimes it is necessary to install sample loops for safety, service, and/or sample conditioning reasons. The MPFC is a convenient, compact, rugged sample interface that is easy to install and even easier to service. The cell’s sapphire windows can be cleaned by simply removing a clean-out plug for direct access to the windows without disconnecting process lines or fiber optic cables. This clean-out port is a Guided Wave innovation.
Key elements of the MPFC design are simple, serviceable o-ring seals, the GW clean-out port, high optical efficiency, slip jointed conduit-ready connections, sapphire windows, a clean flow pattern, and o-ring sealed optics to prevent ambient moisture infiltration. The probe can be field disassembled for o-ring service and reassembled without changing the optical pathlength, a crucial parameter for repeatable measurements.
The Multi-Purpose Flow Cell comes standard in 316L stainless steel but is available in many other alloys. Suitable o-ring materials must be specified to meet your process chemistry and safety requirements. Common materials, such as Viton, Kalrez®, EPDM, etc., are readily available. Please consult appropriate resources for temperature specifications of various o-ring materials and chemical compatibility with your process.
Our multi-purpose flow cells now boast a dual seal at the sapphire “window-to-process” interface. This doubles protection for the expensive internal optical lenses.
The Multi-Purpose Flow Cell operates over the following pressures and temperature ranges:
A version of the MPFC, drilled to accept a heating or cooling fluid, is also available. While the heat exchanged is not sufficient to significantly impact a rapidly flowing sample, it can be used to maintain the temperature of a preconditioned sample.
Like other Guided Wave optical probes, the Multi-Purpose Flow Cell provides exceptional optical performance. Typically, peak transmission exceeds 50%. That means more signal, lower measurement noise translating to lower limits of detection.
PRODUCT | MULTI PURPOSE |
---|---|
Optical Pathlength | 1; 2; 5; 10; and 20 mm |
Spectral Range | UV-VIS (200 – 800 nm); NIR (800- 2100 nm) |
Fiber Connector | SMA 905 |
Optical Efficiency | >45% transmission from 800 – 1650 nm (%T) |
Temperature Range | ≤300 °C (o-ring material dependent) |
Pressure Range | 0 to 500 psi [3450 kPa], (certified version rated to 1000 psi) |
Body Material | 316L SS standard; Hastelloy C-276, others available on request |
O-Ring Material | Viton, EPDM, Kalrez, silicon, other materials available upon request |
Process Connection | 3/4 inch MNPT conduit connection |
Engineered for extremely hazardous materials, and designed with leak prevention
Developed for sample streams that are incompatible with metal components, specifically HF semi-conductor baths
For sample streams, designed for highly corrosive processes and/or trace metal contamination sensitivity
Drilled to accept a heating or cooling fluid, used to maintain the temperature of a preconditioned sample
Support: info@process-insights.com
TERMS AND CONDITIONS
TERMS AND CONDITIONS FOR SERVICE
SELLERS AGREEMENT
DATA PROTECTION
FRAUD ALERT
CHINESE
Copyright © 2022 Process Insights, Inc. All Rights Reserved.